TRiX Real Dry Carbon Fiber Gen 2 & 3 Mini Cooper Fender Flares Wide Arch Kit

Welcome to the listing for our TRiX Genuine Carbon Fibre R56 and F56 fender flares. These are 100% Genuine Carbon Fibre and no the cheaper carbon fibre effect. Fitting wide wheels to the Gen2 and 3 Mini results in a massive grip improvement, but due to the size of the car, 9 inch and wider wheels struggle to fit under the Standard arches. Even when using wheel spacers to widen the track, anything more than 20mm usually results in the tyre rubbing the arches.

We wanted a better stance and a wider track on our demo car, so we decided to make these arches in Carbon fibre. The fronts are 45mm wider and the rears 55mm wider that OEM arches which allow a wider wheel and/spacers to be fitted.

The result is better grip and faster lap times due to a more planted stance on the road, a wider track and the ability to run wider tyres. The genuine carbon fibre also completely transforms the look of the car, giving it a much more aggressive look, and making your car stand out from the others. These arches are originally made for the Gen 3 F series Minis, but we have had a lot of success fitting these on the Gen 2 R56 as the arches follow the same profile.

WE ONLY RECOMMEND HUBCENTRIC WHEEL SPACERS FOR SAFETY. WE HAVE THESE AVAILABLE IN OUR SHOP, 10MM 20MM AND 50MM, SO BE SURE TO CHECK OUR OTHER ITEMS.

It will fit the following vehicles. Gen 2 mini R55 R56 R57 R58 R59 R60 R61. Gen 3 Mini F56 F57.

Wider 45mm front and 55mm rear arch extension. Enables wider wheels of spacers to be fitted (only ever use hubcentric spacers).

Widens the track which can result in increased grip. Easy bolt on, screw on or bond on design. These parts are all direct replacements for the OEM parts. The original arches will need to be removed, and the metal fender and rear quarter will either need to be trimmed down or rolled (a lot) to allow for the wider arches. The arches will need to be either bolted on or bonded on.

This is a bespoke item and is not easy to fit. A fair amount of work will be needed to get them to fit correctly.

However with a bit of time and common sense, it is a job anyone can do if you have the right tools. Unless you are good with bodywork, we recommend professional installation. If you are handy with basic tools, then it is more than possible to fit this wide arch kit. 1 set (4 x arches) Mini Cooper Gen 2 and Gen 3 Carbon Fibre wide arch fender flares. We sell only carbon fibre.

We have many parts in stock for Minis from fenders and scoops to induction kits and interior parts. We also make bespoke items, so if you need anything made, feel free to get in touch.