Quick and easy installation with adhesive tape, withstands any car wash (48 hours after assembly). Best material quality (ABS) and a careful paint finish make the difference! The spoiler is made of ABS material, which is characterized by high strength values, good durability, high hardness and good scratch resistance.
An ideal material for cars. The properties of ABS at a glance: - high surface hardness - good impact resistance - scratch-resistant surface - good resistance to aqueous chemicals (not resistant to solvents) - can be glued with methyl ethyl ketone (MEK).
Easy to work with normal tools - light weight ABS, ACRYLNITRILE BUTADIENE STYRENE, these are amorphous thermoplastics. Installation - assembly / what you should consider: 1. Before you attach the spoiler, please make sure that the surface of the trunk is clean, free of grease and dry 2.
Put on the spoiler and mark with masking tape where the outer edges are 3. Stick the M3 tape on the spoiler or Peel off the protective film and then stick the spoiler on the trunk. TÜV material certificate (ABS spoiler). NOW: TÜV Nord material certificate for all FLY DESIGN spoilers made of ABS material. The TÜV Nord material report confirms that the ABS material of our spoiler has been tested and meets the requirements of the applicable regulations.The material has been thoroughly checked for defects or potentially hazardous materials. The test was carried out by: TÜV NORD Mobility GmbH & Co. KG, IFM - Institute for Vehicle Technology and Mobility, Schönscheidtstr. The test report was created on March 2nd, 2022. The various tests were carried out based on din 52306.
The test covered the following areas: shatterproofness, flammability, edge and surface flame impingement. Have you found the right product? Then you can order immediately! Uncomplicated, fast and secure in just a few steps. All paid orders that we receive by 2 p.
Our ABS spoilers are made from a very stable and solid material. The advantage of the spoiler is clearly the accuracy of fit and the quality. No further adjustment work is required here.
The spoiler is delivered to you and you can install it directly. Our PU spoilers are made from a flexible material. The spoilers are delivered straight and must be adapted to the shape of the rear.
This is done by heating e. On a heater or with a heat gun and bending to the desired shape. Please do not forget to heat the 3M adhesive strips before assembly. This guarantees that the spoiler will not come off. Do you have any questions about our offers?With our professionally processed spoilers, which are painted three times after priming, you not only save nerves, but also the trip to the painter and additional costs for painting, since you can get the finished spoiler from us at a price that is hardly higher than you would otherwise pay for the paint would pay. The rear spoiler is stylistically and functionally adapted to the vehicle. Stil wie amg performance lourence Fller lorenz. Duck tail trunk lip becquet lSvre.
Kofferraum spoiler lippe Heckspoilerlippe Splitter. Abs harte spoiler abrisskante wing flgel. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Spoilers & Wings".The seller is "flydesigngmbh" and is located in this country: DE. This item can be shipped to all countries in Europe.