This product sheet is originally written in English. Please find an automatic translation into English below.
Welcome to RiderPitstop - MOTOMAX INC. You are kindly requested to ask any questions you may have before ordering. If you need any changes / customization / clarification / any other information you would like to know other than the one described here, drop us a line and we will get back to you. Drop-shippers / Resellers / Distributors. We are retail and wholesale and would be happy to develop international resellers and distributors.
In some areas we use an automatically translated description which may be incorrectly translated. We always have products ready or we can have them manufactured quickly. This does not apply to painted and finished products. Do not use long keywords / phrases like (1975 Cadillac Eldorado rear bumper quarter filler panels).
This is a general description and may not relate to the product offered in this listing. The product title given here mainly describes everything about the make and models the product fits (please also check the fitment section if there is any in the description).
We will contact you 1-3 times, no response from you will lead us to send you the ones we have available / are the best sellers. GM and its affiliates have never manufactured aftermarket versions of the bumper fillers that we currently offer.
Only a handful of companies in the world manufacture them and we are among those who manufacture them in-house unlike other companies which have their suppliers in different Asian regions. These bumper fillers are not made from ABS plastic.In case of fiberglass, you can always have them repaired by a professional or do it yourself and they will look like new after the repairs. Our loads are made with flexible resins and the parts can be bent to fit the vehicle. Fiberglass bumper fillers are weather resistant, will not rot or crack (assuming normal use and normal weather conditions), will arrive prepared and primed, ready for prep and minimal painting.
While these are designed to fit like your original bumper infill, using the hardware you already have to secure the new infills, you need to pre-install or pre-install them before performing. Any prep work to see if any changes need to be made based on the unique details of your vehicle.We learned that some GM cars from the 1970s and 1980s were better built than others. If yours isn't the one that was, these fillers will still do, you may just need to lengthen a pre-drilled hole or make some additional modifications first. We know firsthand: the same set of charges can fit a car one way, but when removed from that car and placed on a seemingly identical copy of that model, it does not fit the same way without prior adjustment. If you are inexperienced in auto body work, a qualified body shop experienced in working with GM and bumper fillers should be able to help you with installation and painting.
Please Note: Material / Attachments etc. Not included with any of our products. Please note that our parts are made to factory level specifications. As a result, our bumper extensions only match the original bumper trims or those manufactured by us (Motomax Inc).
Therefore, our bumper extensions will not match other aftermarket fillers and bumper extensions not produced by Motomax Inc or the originals. Text us anytime if you don't see the loads you need, or if you just want to make sure you are ordering the correct loads for your car. Responsibility: Please note that we are not responsible for any labor charges, towing charges, additional repair charges, car rental charges, or other related expenses caused by the length of time it takes for you to received the parts you order, or caused by any of the items listed. Problems and any additional time required to resolve them, or caused by lost or misplaced packages, improper installation and / or use of any incorrect, broken, or faulty part at any time. Photos: The photos we have included in our listing are for reference only, to help you see which part is offered, or to show you a sample photo of the car that the part we have described will fit.
No vehicle is offered for sale. The parts may come in a different color primer than the pictures listed or in several different shades, but that does not matter since all of them require preparation and painting.
We receive a number of messages on a daily basis and work with walk-in clients. Before you message us with a question, be sure to read the full description, check the images, read the title / material / finish provided, item specifications, variations, fitment, etc. If you need any clarification on anything or have a question that is not covered in the list, please feel free to send us a message. Take the time to answer your questions.
We usually keep enough stock to fill orders. Please ignore the available quantity mentioned in our announcements. This is mentioned so that the article does not end and watchers lose connection with the announcements.
Irregular packaging like mudguards and other items can be delivered in foam packaging only. Please note that resolving claims takes time, we will need your patience throughout the process. Due to lockdowns in some parts of the world, transit times have increased from 10 to 30 days. In most cases, Russia, Brazil, Argentina, Finland, New Caledonia, Ukraine, Estonia, Lithuania, Latvia, Belarus, Azerbaijan, Kazakhstan, Mongolia, North Korea, etc.
It takes time to resolve claims, we will require your patience throughout the process. We have a return location at 18974 PA, USA and 73033 Stuttgart, Germany. We are not able to provide a return label. Always attached with all included parts shown and described in the listing and without any modifications. RiderPitstop Division may be subject to late return charges.Products should be described as return orders, and not for sale with "zero" market value sent by any service other than post. We try our best to make our customers satisfied, but problems arise unexpectedly even after our strict quality control. Please note that we can only help you if you cooperate with us to solve the problems.
These questions take time, but we do our best to resolve any issues as quickly as possible. In any case, if the goods are not as expected or have some problem, just send us a quick message with pictures and we will try to find a solution asap. We reserve the right to cancel any order. No manuals, guides, installation instructions, photos, etc. Are provided to help you install the product.None of our products come with lights, hardware, grille / mesh (regardless of pictures listed), seat (in case of rear fender) etc. Since all of our products are custom made, they may be difficult to install and you may need professional help with the installation which may lead to additional costs (sometimes more expensive than the product itself). No Tuv certificate / other document is provided to automotive authorities to legalize the use of our products on your automobile.
Adjustment / Finishing / Additional work / Adjustments / Modifications required. Due to the fact that this is a completely manual process, there are chances of problems. Note - There are a number of problems present in molded fiberglass products.Not all parts have all the issues or the same issues with all products usually we don't have issues with our products. Some products don't have any issues, which we're looking for, but in some cases there may be some, one, or all of the issues mentioned here. Don't expect products to look / function like mass-produced items right out of the box.
Fiberglass products will be supplied unpainted (except where noted for any other finish) and in a gel-coat / bare / primer (white / black / gray / any other color) finish regardless of the images listed. The actual color / finish of the item may vary from the photos.
Please Note: The gel coat is purely a sandable surface and may have some scratches (may look used but it is not). This may require a few processes to be done before painting i. Prep / prep, sanding, stretching / compressing / squeezing / expanding due to warping / shrinking (may look asymmetrical), primer and paint according to your choice of color at your expense.
Interior surface of parts may look bad / unpleasant and may require prep and painting. You may need to do all of the following to make the item a perfect fit for your application, which may require professional help and may incur additional charges to be paid (this is to be paid by the customer only) / Finish / Cut / Cut Tail Light Slots / Grading / Increased Hole Size / Bodywork - Includes Drill Holes (We / Cannot Drill Holes Unless Customer Specified At Time Of Order, regardless of pictures) Sanding / Scuffing / Scuffing / Fiber Filling / No More Adding Material or Casting etc./ Preparation / Preparation work / Polishing / Polishing / Gluing / Gluing / Fixing broken mounting legs / Relocation of broken / bent mounting legs / Supports / Minor-major modifications / Cleaning / Washing / Degreasing / Deburring / Other forms of repair / Adjustments / Alignment, customization of original or new seats to match airbox covers for V-rod and Softail models, additional hardware - nuts / bolts / washers / spacers / tabs / thimbles / bungs / clips / brackets / rivets / screws / grids / Mesh / custom attachments or other fittings to be able to fit the product and this should be done before the paint job. Items may have scratches / broken areas / pinholes / scuffs / burrs / edges or unfinished areas / discoloration of surface finish / stars or spider marks / dents / grease marks / fingerprints / dust / uneven surface / surface waves / sagging / porosity / craters / Pock Marks / Fisheyes / Air bubbles / Orange peel / Surface flakes / Wrinkles / Alligator marks / Flouring / Discoloration / Stains / Distortion or warping or warping or wavy surface / Fiber loss / Loose mounting points / Dimples / Roughness / Release or delamination of surface layer / Surface defects / Lines of mold or fold separation / Fiber release / Water stains / Resin tear / Blisters / Reddening / Heat lines / Poor flow or leveling / Air pockets / Pre-release / Print through pattern on the surface from fiber reinforcement / Sticky surface or inner side / Unhardened surface or resin / pits / chips / packing marks / cracks / stress cracks etc.
All of these are common with molded fiberglass products and should be repaired / finished prior to painting. Made with transparent resins, light can pass through fiberglass parts. Most of the problems mentioned above mean the same with different names.
Not all parts have problems. Please study the operation and problems with fiberglass before ordering if you want to do everything yourself. Since these are handcrafted parts, don't expect them to fit like an OEM produced part. Parts / vehicle may require significant modification to fit.We also offer a complete finishing system ranging from high quality standard and custom sanding, primer and paint jobs, hydrography / hydrodipping, electroluminescent paint, chrome spray, heat sensitive paint, neon paint, paint phosphorescent, silver / gold foil, scratches, powder coating, anodizing etc. Check with us before ordering. In painted / finished products we will take care of surface defects and prep work (drilling may still be required). Adjustments / modifications may still be necessary. Our products are supplied with standard quality paint. Don't expect spray chrome products to be as good as real hard chrome products. It is basically a paint in chrome finish. Carbon fiber finish (additional cost). The parts listed with the name of carbon fiber are fiberglass parts covered with carbon fiber hydrographic / hydro dipping film, not real carbon fiber.
Don't expect carbon fiber hydrographic products to perform as well / look as real carbon fiber products. This is basically a layer of printed vinyl film coated onto the parts and is for cosmetic purposes only. Metal parts will come in an unpainted / unfinished / surface oxidation (rust) condition unless it is mentioned in the listing, regardless of the images listed. Some media may be black in color. Painted / Chrome / Nickel Etc.
Plated parts may also have rust on the surface. The interior of metal parts may require sealing before painting or mounting on the motorcycle.
Stainless steel products tend to change color with heat. Polished metal items may have polish marks / scuffs / fabric burrs. Don't expect them to be mirror polished.Cast metal parts may have casting defects i. Dents, dents, potholes, marks and imperfections, polishing compound residue, etc. And each is slightly different. May not look like pictures.
Extra work for the products listed in our store. Our products are mainly used for entertainment purposes and we are not responsible if anything breaks / fails resulting in injury or injury while riding / installing (professional installation is always advised). We only work with the best tested suppliers, but since the parts are handmade, they do not go through a strict quality control system like mass produced products. Please check with your own authorities for any additional documentation / approvals required to use the product in your region.
We are not responsible for fines caused by using our product without approval. Your feedback is important to us so that our customers can learn more about our products and services. We are open to suggestions. Please feel free to send us any suggestion regarding our products / Description, etc. Your contributions are important to us.People who would feature our products on their YouTube channel / Sta-gram page / Fa Ce-book page with 1000 or more subscribers can request special discounts. We are constantly adding new products for Vintage and Classic Motorcycles and Cars, Bobbers, Choppers, Baggers, Cafe Racers, Street Bikes, Hot Rods, etc. We would be happy to answer all of your questions. We would appreciate if you could publicize our company among car clubs, F Ace-book, Sta-gram parts dealers, bike shows, etc.
In this way, we can help more people and enthusiasts like you make their machines stand out with the unique products we offer. No part of this description and the images on this page may be reproduced, distributed, used for commercial purposes / advertisements by other sellers, or transmitted in any form or by any means, including photocopying, l'' recording or other electronic or mechanical methods, without the prior written permission.
Some well known brand names are mentioned in the titles so that customers can find products quickly and know that the item can fit / can be designed to fit their vehicle. Seek the advice of legal counsel if you are unsure of its effect. By purchasing products from Motomax Inc. The customer hereby guarantees that he / she has carefully read this agreement, that he understands its terms and conditions, that he / she acknowledges that he / she will waive substantial legal rights in purchasing any product offered by Motomax Inc.
This Agreement represents the entire understanding between the parties regarding these matters and no representation, statement or oral inducement has been made outside of this Agreement. If any provision of this Agreement is held to be illegal, void or for any reason unenforceable, then that provision will be deemed severable from this Agreement and will not affect the validity and enforceability of the remaining provisions. Our products do not meet Dot or SAE guidelines for safety. This is especially true for our fiberglass products, the metal tanks crash on impact.
Fiberglass can break and leak on impact. This is of course a source of fire and a danger to you and others. By purchasing any of our products (and other non-compliant Dot and SAE parts), you assume the risk of danger, personal injury, and death. We are a trading company and all the products we have listed are manufactured / supplied by third parties only. We have no control over the production of patented / branded / third party registered products.
All products, images, logos, titles and information are provided by third parties. All cases are to be settled under the jurisdiction of Delhi, India only. We wish you a nice day and look forward to your visit again in our store.. Some products have no issues, which we are looking for, but in some cases there may be some, one, or all of the issues. GRAY / BLACK / WHITE GELCOAT / PRIMER.Country / Region of Manufacture. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Interior Styling\Gearstick Gaiters & Sleeves". The seller is "riderpitstop-mmx-us" and is located in this country: IN. This item can be shipped to United Kingdom.