All Terrain Front and Rear Fender Flares Kit (11620.10) by Rugged Ridge®, Set of 4 Pieces. Tire Coverage: 1.5" Front, 1" Rear. Slightly Less Width than Factory Flares.Oversized wheels and tires require more room between the tires and fender flares. These flat flares will give you the clearance you need even with little or no suspension lift.
They're made from strong, durable thermoplastic and require easy bolt-on installation. Provides additional clearance between fender flares and oversized tires. Work even with little or no suspension lift. With 1.5 inches less coverage in the front and 1 inch less in the rear these flares are slightly narrower than factory, yet still maintain proper tire coverage and aggressive looks. Constructed from flexible high-impact thermoplastic for off-road durability.UV treated to prevent fading. Bolt-on using factory mounting points, no drilling required. Includes brackets to relocate side marker lights. 2 Pieces of Front Fender Flares. 2 Pieces of Rear Fender Flares. Hardware and Brackets To Relocate Factory Side Marker Lights. Whether you're going to be doing serious off-roading or you just want the looks of bigger tires and never leave the pavement, you're going to need more room between the tires and fender flares. These flat flares install in place of your factory flares, and with them you can run bigger tires without them interfering with the fender flares. These flares will allow you to run bigger tires with little or no suspension lift, which means your Jeep can maintain a lower center of gravity for more stability, yet have greater ground clearance that is necessary for off-roading. Constructed from flexible high-impact thermoplastic, these flares are tough enough to take anything the trail can dish out. They're UV treated to prevent sun fading, and bolt-on easily, using the same mounting points as the factory flares. The fender flares come with all necessary mounting hardware, and since factory mounting points are used, no drilling is required. Easy to install mounting brackets are included that allow you to relocate and use the existing factory side marker lights. Rugged Ridge® is a division of Omix-Ada, the leader in Jeep replacement parts. Based in Suwanee, Georgia, Rugged Ridge was begun almost two decades ago when the enthusiasts at Omix-Ada decided that even a vehicle as tough as a Jeep could be improved upon. Since then, Rugged Ridge has created over 500 accessories to improve your Jeep's performance, utility and appearance.
Unlike parts made for ordinary vehicles, Rugged Ridge knows that every part made for a Jeep must uphold the Jeep tradition of strength and capability, so every part is designed, tested, manufactured and tested again to make sure it's perfected. Then and only then can it be installed on your Jeep.
WARNING Cancer and Reproductive Harm. The item "Rugged Ridge 11620.10 Flat Fender Flare Kit for Jeep Wrangler JK JKU 2007-18" is in sale since Wednesday, January 29, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Fenders".
The seller is "wickedwolfauto" and is located in Taylorsville, Utah. This item can be shipped worldwide.